|
|
BIOS beep codesMYLEX BIOS beep codes1 - Normal boot (System is booting normally)2 - Video adapter error (The video adapter is either faulty or not seated properly. Check the adapter) 3 - Keyboard controller error (The keyboard controller IC is faulty. Replace the IC if possible) 4 - Keyboard error (The keyboard controller IC is faulty or the keyboard is faulty. Replace the keyboard, if problem still persists, replace the keyboard controller IC) 5 - PIC 0 error (The programmable interrupt controller is faulty. Replace the IC if possible) 6 - PIC 1 error (The programmable interrupt controller is faulty. replace the IC if possible) 7 - DMA page register error (The DMA controller IC is faulty. Replace the IC if possible) 8 - RAM refresh error 9 - RAM data error 10 - RAM parity error 11 - DMA controller 0 error (The DMA controller IC for channel 0 has failed) 12 - CMOS RAM error (The CMOS RAM has failed) 13 - DMA controller 1 error (The DMA controller IC for channel 1 has failed) 14 - CMOS RAM battery error (The CMOS RAM battery has failed. If possible, replace the CMOS or battery) 15 - CMOS RAM checksum error (The CMOS RAM has failed. If possible, replace the CMOS) 16 - BIOS ROM checksum error (The BIOS ROM has failed. If possible replace the BIOS or upgrade it) Index --->
DISCLAIMER: |
|