BIOS beep codesCOMPAQ BIOS beep codes1 short - No error (System is booting properly)
1 long, 1 short - BIOS ROM checksum error (The contents of the BIOS ROM to not match the expected contents. If possible, reload the BIOS from the PAQ)
2 short - General error (Unknown)
1 long, 2 short - Video error (Check the video adapter and ensure it's seated properly. If possible, replace the video adapter)
7 beeps (1 long, 1s, 1l, 1 short, pause, 1 long, 1 short, 1 short) - AGP video (The AGP video card is faulty. Reseat the card or replace it outright. This beep pertains to Compaq Deskpro systems)
1 long neverending beep -Memory error (Bad RAM. Replace and test)
1 short, 2 long - Bad RAM (Reseat RAM then retest; replace RAM if failure continues)
(Page 1 of 7)
Index --->
DISCLAIMER:
Any named products on this website are copyright © and/or trademarks ® of their respective companies.
INFORMATION ON THIS WEB SITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
The material included in this site has been compiled from a variety of sources and the site may include technical inaccuracies or typographical errors.
Information may be changed or updated without notice.
While every effort is made to ensure the correctness of the information provided here, the author can accept no responsibility for damages caused directly or indirectly from the use of such information.
The author will not be responsible for damage or loss of data. You are advised to backup data regularly!
By entering this site you are agreeing to this and also to never suing the author.
|