BIOS beep codesAWARD BIOS beep codes1 long, 2 short - Video adapter error (Either video adapter is bad or is not seated properly. Also, check to ensure the monitor cable is connected properly)
Repeating (endless loop) - Memory error (Check for improperly seated or missing memory)
1 long, 3 short - No video card or bad video RAM (Reseat or replace the video card)
High frequency beeps while running - Overheated CPU (Check the CPU fan for proper operation. Check the case for proper air flow)
Repeating High/Low - CPU (Either the CPU is not seated properly or the CPU is damaged. May also be due to excess heat. Check the CPU fan or BIOS settings for proper fan speed)
(Page 1 of 8)
Index --->
DISCLAIMER:
Any named products on this website are copyright © and/or trademarks ® of their respective companies.
INFORMATION ON THIS WEB SITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
The material included in this site has been compiled from a variety of sources and the site may include technical inaccuracies or typographical errors.
Information may be changed or updated without notice.
While every effort is made to ensure the correctness of the information provided here, the author can accept no responsibility for damages caused directly or indirectly from the use of such information.
The author will not be responsible for damage or loss of data. You are advised to backup data regularly!
By entering this site you are agreeing to this and also to never suing the author.
|